Disposable Medical PVC gloves are widely used in electronics, food processing, cleaning, medical and other industries because of their low cost and excellent protective effect. Its main raw material is polyvinyl chloride, and the production process of Medical PVC gloves is as follows:

Raw material mixing: Mix raw polyvinyl chloride resin powder, diisononyl phthalate, calcium zinc stabilizer and viscosity reducer in a certain proportion;
Defoaming and standing: After the first full stirring of the mixer, the mixed material is allowed to stand to remove the dissolved air in the material and the monomer in the raw material;
Filtration refinement: filter and refine the material after static defoaming through a certain mesh filter screen, so that the mixed material initially meets the requirements of subsequent production;
Vacuum defoaming: Add a small amount of viscosity reducer to the material again, and perform secondary stirring.
PVC dipping: transfer to a PVC dipping tank for dipping, and heat and plasticize the mixture;
Plasticizing molding: After entering the polyurethane (PU) material tank for dipping, heating and drying;
Glove curling lip: The Medical PVC gloves manufacturer tells you the blank on the hand mold, and the lip curling is performed on the lip curling machine;
Peeling gloves: Use an automatic peeling machine to separate the gloves from the hand mold.
Glove testing: Medical PVC gloves quality control process methods, tests include puncture resistance test, abrasion resistance test, corrosion resistance test, tearing force test value, gram weighing and pinhole test, etc. The test follows the AQL standard, and only qualified gloves are left behind.